Insumos graficos, alcohol isopropilico, insumos gráficos, alcohol isopropílico

                  

Insumos para la industria grafica - Alcohol isopropilico de alta pureza

Cnel. Magán 770 (B1872BZJ)
Sarandí - Avellaneda - Pcia de Bs. As.
Tel./Fax: 011 4205-3859/3482 4204-9276
ventas@provisionquimica.com.ar

            Provisión Química, fabricación y distribución de insumos gráficos. Alcohol isopropílico 99,5% de pureza.
   
Productos
 bullet Instrumental  Insumos graficos: Instrumental de medicion, cilindros para maquinas offset
 bullet Cilindros  Insumos graficos: Instrumental de medicion, cilindros para maquinas offset
Gráfica
  Insumos Gráficos
  Aerosoles
  Tintas Siegwerk
  Tintas Hostmann-Steinberg
  Artículos de Interés para las Artes Gráficas
Industria
  Prod. Químicos
  Aerosoles
Transporte
  Prod. Químicos
  Aerosoles
Artículos de interés general
  Utilización de los insumos gráficos: La humectación
  Cómo limpiar una notebook

 

 

     


DiST-Hi-tech (HI98303)

Conductivity and TDS Testers with ATC

 


Regardless of what field you are in, the amount of salt or solids (TDS) in water is important. Salt causes corrosion and leaves scale deposits which will damage industrial equipment. Too much salt can harm aquatic flora and fish and too little salt (low conductivity) will prevent effective transfer of nutrients to plants. Salt is also undesirable in drinking water.

The DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. DiST 1 and DiST 2 measure TDS, while DiST 3 and DiST 4 measure conductivity.

The casing of the popular DiST testers has been redesigned for increased strength, to better fit your hand and also offer a much larger LCD for easier viewing. The graphite sensors provide better repeatability since they do not oxidize. The probe is user replaceable. In fact, the whole PCB module slides out and can be replaced. The casing has been shaped in such a way as to ease air bubbles out. The temperature sensor is exposed and provides faster response time.

Temperature effects your conductivity measurements by 2% per degree centigrade. Automatic Temperature Compensation assures that all readings are corrected to compensate for the effect of temperature. An LCD displays the digits clearly so they can be read at virtually any angle. If calibration is necessary simply submerge the electrode into calibration solution, and turn the trimmer at the back of the tester.

 

Specifications:

DiST 1

DiST 2

DiST 3

DiST 4

Range:

1999 ppm (mg/L)

10.00 ppt (g/L)

1999 µS/cm

19.99 mS/cm

Resolution:

1 ppm (mg/L)

0.01 ppt (g/L)

1 µS/cm

0.01 mS/cm

Accuracy(@20°C/68°F):

±2% Full Scale

±2% Full Scale

±2% Full Scale

±2% Full Scale

Typical EMC Deviation:

±2% Full Scale

±2% Full Scale

±2% Full Scale

±2% Full Scale

Calibration Solution:

HI 70032P

HI 70038P

HI 70031P

HI 70039P

Calibration:

Manual 1 point through trimmer

Temp.Compensation:

Automatic from 0 to 50°C (32 to 122°F)

Battery Type/Life:

4 x 1.4V / 150 hours approx. continuous use

Environment:

0 to 50°C (32 to 122°F); RH 95%

Dimensions:

175 x 41 x 23 mm (7.9 x 1.8 x 1")

Weight:

78 g (2.7 oz.)


Solicite Cotizaciones
Enviamos nuestros productos a todo el País
 

    
  Contáctenos
  Ubicación
  Exportaciones

  Matafuegos
  Señalizaciones
  Primeros Auxilios


Agregar a favoritos

 

Login:
Usuario:

Password:

 

  

 

 ©2007  Provisión Química

ventas@provisionquimica.com.ar